G.L. Huyett has acquired AZ Lifting Hardware
Bent Pins
Bent pins are simple pins with one straight end and a 25° angle bent arm at the opposite end. This low cost pin comes standard drilled to be used with a wire form pin. By special order a groove can be turned at the end that can be secured with a retaining ring.

Search within Bent Pins

Filter By
  • Low Carbon Steel
  • Stainless Steel
  • Plain
  • Zinc Clear
  • None
  • 2-1/2" - 4"
  • 2-1/8" - 4"
  • 2.500" (2-1/2)
  • 3.000" (3)
  • 3.500" (3-1/2)
  • 4-1/2" - 6"
  • 4-1/8" - 6"
  • 4.000" (4)
  • 4.500" (4-1/2)
  • 4.750" (4-3/4)
  • 5.000" (5)
  • 6-1/8" - 8"
  • 6.750" (6-3/4)
  • 7.250" (7-1/4)
  • .313" (5/16)
  • .373"
  • .375" (3/8)
  • .496"
  • .500" (1/2)
  • .621"
  • .625" (5/8)
  • .746"
  • .750" (3/4)
  • .996"
  • 1.000" (1)
  • 1.221"