Aztec Lifting, Rigging, and Suspension Hardware Now Available from G.L. Huyett
Headless Pins
Solid pins that are either grooved, drilled, or grooved and drilled at each chamfered end. Headless Pins are held in place by wire rings, wire formed pins such as bridge pins that facilitate quick assembly/disassembly, or retaining rings such as E-clips that produce greater thrust load ratings than wire rings. The versatile headless design is typically used in blind holes or on yokes. As the head and body of the pins are same the diameter, either end can be installed making them ideal for use in automated assembly and applications with high lateral force.

Search within Headless Pins

Filter By
  • Low Carbon Steel
  • Medium Carbon Steel
  • Zinc Clear
  • None
  • .875" (7/8)
  • 1.000" (1)
  • 1.031" (1-1/32)
  • 1.094" (1-3/32)
  • 1.281" (1-9/32)
  • 1.344" (1-11/32)
  • 1.406" (1-13/32)
  • 1.531" (1-17/32)
  • 1.594" (1-19/32)
  • 1.656" (1-21/32)
  • 1.719" (1-23/32)
  • 1.781" (1-25/32)
  • 1.844" (1-27/32)
  • 1.906" (1-29/32)
  • 2.000" (2)
  • 2.281" (2-9/32)
  • 2.344" (2-11/32)
  • 2.406" (2-13/32)
  • 2.770"
  • 2.844" (2-27/32)
  • 2.906" (2-29/32)
  • 3.000" (3)
  • 3.057"
  • 3.344" (3-11/32)
  • 3.406" (3-13/32)
  • 3.557"
  • 3.682"
  • 3.807"
  • 4.057"
  • .500" (1/2)
  • .531" (17/32)
  • .719" (23/32)
  • .750" (3/4)
  • 1.000" (1)
  • 1.250" (1-1/4)
  • 1.391" (1-25/64)
  • 1.500" (1-1/2)
  • 1.531" (1-17/32)
  • 2.000" (2)
  • 2.250" (2-1/4)
  • 2.391" (2-25/64)
  • 2.500" (2-1/2)
  • 2.750" (2-3/4)
  • 2.875" (2-7/8)
  • 3.000" (3)
  • 3.250" (3-1/4)
  • .188" (3/16)
  • .250" (1/4)
  • .313" (5/16)
  • .375" (3/8)
  • .438" (7/16)
  • .500" (1/2)
  • .625" (5/8)
  • .750" (3/4)
  • .875" (7/8)
  • 1.000" (1)
  • 1.125" (1-1/8)
  • 1.250" (1-1/4)
  • 1.375" (1-3/8)
  • 1.500" (1-1/2)
  • 1.625" (1-5/8)
  • 1.750" (1-3/4)
  • 1.875" (1-7/8)
  • 2.000" (2)