G.L. Huyett has acquired AZ Lifting Hardware
Snap Pins
Innovations in three-point pin designs have accelerated in recent years, as these devices are now available in more styles and materials than ever before. Most of the designs have been made to improve the compatibility and flexibility of three-point hitches found on the back of agricultural equipment. Three-point hitches provide linkage between the power take off (PTO), hydraulics, and hauling capabilities of tractors to compatible implements. In this day and age, a tractor can be used for everything from plowing, sowing, and harvesting to mowing, snow removal, and chemical spraying.

Search within Snap Pins

Filter By
  • ITW Shakeproof Group
  • 300 Series Stainless Steel
  • Carbon Steel
  • Low Carbon Steel
  • None
  • Passivated
  • Zinc Clear
  • Zinc Yellow
  • None
  • Snap Pin Coil Tension
  • Snap Pin Round One Wire
  • Snap Pin Round One Wire Tab Lock
  • Snap Pin Round Two Wire
  • Snap Pin Round Two Wire Tab Lock
  • Snap Pin Square One Wire
  • Snap Pin Square One Wire Tab Lock
  • Snap Pin Square Two Wire
  • Snap Pin Square Two Wire Tab Lock
  • None
  • 1.438" (1-7/16)
  • 1.500" (1-1/2)
  • 1.563" (1-9/16)
  • 1.625" (1-5/8)
  • 1.750" (1-3/4)
  • 2.000" (2)
  • 2.500" (2-1/2)
  • 2.750" (2-3/4)
  • 3.000" (3)
  • 1.625" (1-5/8)
  • 1.750" (1-3/4)
  • 2.000" (2)
  • 2.250" (2-1/4)
  • 2.313" (2-5/16)
  • 2.500" (2-1/2)
  • 2.625" (2-5/8)
  • 2.750" (2-3/4)
  • 3.000" (3)
  • 3.250" (3-1/4)
  • 3.438" (3-7/16)
  • 3.750" (3-3/4)
  • 3.938" (3-15/16)
  • 4.125" (4-1/8)
  • 4.438" (4-7/16)
  • 4.734" (4-47/64)
  • 4.797" (4-51/64)
  • 4.875" (4-7/8)
  • 4.984" (4-63/64)
  • 5.047" (5-3/64)
  • 5.234" (5-15/64)
  • 5.297" (5-19/64)
  • 5.750" (5-3/4)
  • 6.311"
  • 6.438" (6-7/16)
  • 6.797" (6-51/64)
  • 6.813" (6-13/16)
  • 7.047" (7-3/64)
  • 7.061"
  • 7.313" (7-5/16)
  • 1.375" (1-3/8)
  • 1.500" (1-1/2)
  • 1.750" (1-3/4)
  • 2.125" (2-1/8)
  • 2.250" (2-1/4)
  • 2.500" (2-1/2)
  • 2.750" (2-3/4)
  • 3.000" (3)
  • 3.500" (3-1/2)
  • 4.000" (4)
  • 4.250" (4-1/4)
  • 4.500" (4-1/2)
  • 5.500" (5-1/2)
  • 6.000" (6)
  • 6.250" (6-1/4)
  • .250" (1/4)
  • .313" (5/16)
  • .375" (3/8)
  • .500" (1/2)
  • .625" (5/8)
  • .750" (3/4)
  • .875" (7/8)
  • 1.000" (1)