Aztec Lifting, Rigging, and Suspension Hardware Now Available from G.L. Huyett
Eye End
Turnbuckles are not intended for lifting as they are designed to take up slack and apply tension for support or suspension, or to adjust the length of rope, cable, or tie rods. They consist of a metal frame called a body that is tapped with a left-hand thread on one end, and a right-hand thread on the other. Two end fittings (studs, eyes, hooks, or jaws or a combination of any two of these) are screwed into either end and attached to workpieces on either end before the body is rotated (turned) and both end fittings are drawn into the body simultaneously to apply tension. Turnbuckle Eye Ends are available with either left handed or right handed threads, one of each is needed to complete the turnbuckle assembly. Eye Ends are typically used with shackles or other components that can be opened and attached to the eye.

Search within Eye End

Filter By
  • Aztec Lifting Hardware
  • 1045 Carbon Steel
  • 304 Stainless Steel
  • Hot Dipped Galvanized
  • Polished
  • Eye End
  • 1 For 18 TB
  • 1 For 24 TB
  • 1-1/2 For 12 TB
  • 1-1/2 For 18 TB
  • 1-1/4 For 12 TB
  • 1-1/4 For 18 TB
  • 1-1/4 For 24 TB
  • 1-3/4 For 18 TB
  • 1-3/4 For 24 TB
  • 1-8 For 12 TB
  • 1-8 For 6 TB
  • 1/2 For 12 TB
  • 1/2 For 6 TB
  • 1/2 For 9 TB
  • 1/4 For 4 TB
  • 2-1/2 For 24 TB
  • 3/4 For 12 TB
  • 3/4 For 18 TB
  • 3/4 For 4-1/2 TB
  • 3/4 For 6 TB
  • 3/4 For 9 TB
  • 3/8 For 6 TB
  • 5/16 For 4-1/2 TB
  • 5/8 For 12 TB
  • 5/8 For 6 TB
  • 5/8 For 9 TB
  • 7/8 For 12 TB
  • 7/8 For 6 TB
  • 1"
  • 1-1/2"
  • 1-1/4"
  • 1-3/4"
  • 1/2"
  • 1/4"
  • 2-1/2"
  • 3/4"
  • 3/8"
  • 5/16"
  • 5/8"
  • 7/8"
  • 10
  • 11
  • 13
  • 16
  • 18
  • 20
  • 5
  • 6
  • 7
  • 8
  • 9