Products > Industrial Fasteners > Retaining Rings & Circlips > E-Clips & E-Rings

E-Clips & E-Rings

E-clips—also known as E-rings—are three pronged, stamped clips that fit into machined grooves of smaller diameter tubes and shafts. E-clips are installed radially and have a wider shoulder than other types of external rings (snap rings or crescent rings), thus providing a larger retaining area and yielding higher thrust load capacity. These popular retaining rings are used in a wide variety of applications ranging from automotive to medical!

  • Offered in copper, carbon spring steel, and stainless steel materials
  • Available in cadmium, phosphate, passivated, zinc clear, zinc phosphate, and zinc yellow finishes
  • G.L. Huyett is a proud distributor Rotor Clip® E-Clips!
  • Visit our Product FAQs to learn more about Retaining Rings

E-Clip Installation

E-clips are installed radially and have a wider shoulder than other types of external rings (snap rings or crescent rings), thus providing a larger retaining area and yielding higher thrust load capacity. To install an e-clip, place the clip’s opening into a groove on the shaft and apply force so the e-clip slips over the shaft into its final position.

E-Clips & E-Rings

Search within E-Clips & E-Rings

Aztec Lifting, Rigging, and Suspension Hardware Now Available from G.L. Huyett
Filter By
  • Rotor Clip
  • Beryllium Copper
  • Carbon Spring Steel
  • Stainless Steel
  • Cadmium
  • Passivated
  • Phosphate
  • Plain
  • Zinc Clear
  • Zinc Clear Trivalent
  • Zinc Phosphate
  • Zinc Trivalent
  • Zinc Yellow
  • E-Clip - Bowed Ext
  • E-Clip - Bowed Special
  • E-Clip - Ext
  • E-Clip - Reinforced Ext
  • E-Clip - Special
  • E-Clip - Special Ext
  • E-Clip MS - Bowed Ext
  • E-Clip MS - Ext
  • E-Clip MS - Reinforced Ext
  • None
  • Inch
  • Metric
  • .040"
  • .063" (1/16)
  • .094" (3/32)
  • .109" (7/64)
  • .125" (1/8)
  • .141" (9/64)
  • .156" (5/32)
  • .172" (11/64)
  • .188" (3/16)
  • .219" (7/32)
  • .250" (1/4)
  • .313" (5/16)
  • .375" (3/8)
  • .438" (7/16)
  • .500" (1/2)
  • .563" (9/16)
  • .625" (5/8)
  • .744"
  • .750" (3/4)
  • .875" (7/8)
  • .984" (63/64)
  • 1.188" (1-3/16)
  • 1.375" (1-3/8)
  • M1.00-1.40
  • M1.40-2.00
  • M10.00
  • M10.00-14.00
  • M11.00-15.00
  • M12.00
  • M13.00
  • M13.00-18.00
  • M15.00
  • M16.00
  • M16.00-24.00
  • M2.00
  • M2.00-2.50
  • M2.50-3.00
  • M20.00
  • M20.00-31.00
  • M25.00
  • M25.00-38.00
  • M3.00
  • M3.00-4.00
  • M32.00-42.00
  • M4.00
  • M4.00-5.00
  • M5.00
  • M5.00-7.00
  • M6.00
  • M6.00-8.00
  • M7.00
  • M7.00-9.00
  • M8.00
  • M8.00-11.00
  • M9.00
  • M9.00-12.00
  • NA
  • .030"
  • .050"
  • .061"
  • .070"
  • .074"
  • .079"
  • .080"
  • .095"
  • .100"
  • .102"
  • .105"
  • .110"
  • .116"
  • .118"
  • .120"
  • .125" (1/8)
  • .127"
  • .130"
  • .147"
  • .150"
  • .188" (3/16)
  • .190"
  • .210"
  • .250" (1/4)
  • .303"
  • .310"
  • .340"
  • .343"
  • .380"
  • .396"
  • .400"
  • .437"
  • .485"
  • .490"
  • .580"
  • .625" (5/8)
  • .630"
  • .675"
  • .680"
  • .835"
  • .840"
  • 1.079"
  • 1.080"
  • 1.230"
  • M0.80
  • M1.20
  • M1.45
  • M1.50
  • M1.90
  • M10.00
  • M10.30
  • M11.80
  • M12.00
  • M12.50
  • M15.00
  • M16.00
  • M19.00
  • M2.00
  • M2.30
  • M2.50
  • M20.00
  • M24.00
  • M3.10
  • M3.20
  • M3.90
  • M30.00
  • M4.00
  • M4.85
  • M5.00
  • M5.55
  • M6.00
  • M6.40
  • M7.00
  • M7.10
  • M7.20
  • M8.00
  • M9.00
  • M9.60
  • Stamped
Results 1 - 15 of 688
|<  <   1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ...   >  >|
Results 1 - 15 of 688
|<  <   1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ...   >  >|