DIN Standard Eye Bolts

The DIN 582 lifting eye nut is a shouldered, or collared, type of lifting eye with metric threads. Lifting eye nuts are female threaded and are designed for use with a threaded shank. They are primarily used for permanent mounting to industrial machinery or equipment for lifting, rigging, or lashing, or as an anchor point for other rigging hardware. While the shoulder pattern provides greater stability at the base of the eye to accommodate angular loads, be sure to consult specifications for WLLs prior to conducting lifts as Eye Nuts are recommended primarily for zero degree, in-line lifts. WLLs are reduced significantly for non-axial loads.

  • Shoulder design reduces stress on the shank during angular lifts
  • Cast or forged eye is a strong anchor for clevis ends or yoke ends
  • Available in a variety of corrosion resistant finishes
  • Carbon steel or 304 stainless steel lifting eye nuts available
  • Working load limit decreases significantly during angular loads
  • Check out our Lifting IQ tool to order custom lifting hardware online
  • Visit our Knowledge Vault to learn more about safe lifting practices
  • Visit our Product FAQs to learn more about Lifting Hardware
G.L. Huyett has acquired AZ Lifting Hardware
DIN Standard Eye Bolts

Search within DIN Standard Eye Bolts

Filter By
  • Aztec Lifting Hardware
  • 1015 Carbon Steel
  • 304 Stainless Steel
  • Hot Dipped Galvanized
  • Polished
  • Self Colored
  • Zinc Clear Trivalent
  • Zinc Yellow Trivalent
  • None
  • Inch
  • Metric
  • 3/8"
  • M10
  • M12
  • M14
  • M16
  • M20
  • M22
  • M24
  • M27
  • M30
  • M33
  • M36
  • M6
  • M8
  • M15.00
  • M20.00
  • M25.00
  • M30.00
  • M35.00
  • M36.00
  • M40.00
  • M45.00
  • M50.00
  • M55.00
  • M60.00
  • M65.00
  • M70.00
  • 3/8"
  • M10
  • M12
  • M14
  • M16
  • M20
  • M22
  • M24
  • M27
  • M30
  • M33
  • M36
  • M6
  • M8
  • 1
  • 1.25
  • 1.5
  • 1.75
  • 16
  • 2
  • 2.5
  • 3
  • 3.5
  • 4