Lifting Eye Nuts

Standard lifting eye nuts, or plain patterned eye nuts, are recommended for zero degree vertical lifts or in-line loads. Standard eye nuts are female threaded, sized in inches and are designed for use with a threaded shank. They are primarily used for permanent mounting to industrial machinery or equipment for lifting, rigging, or lashing, or as an anchor point for other rigging hardware. Be sure to consult specifications for WLLs prior to conducting lifts as WLLs are reduced significantly for non-axial loads. Carbon steel or 304 stainless steel lifting eye nuts are available.

  • Recommended only for zero degree vertical lifts or in-line loads
  • Cast or forged eye is a strong anchor for clevis ends or yoke ends
  • Available in a variety of corrosion resistant finishes
  • Working load limit decreases significantly during angular loads
  • Check out our Lifting IQ tool to order custom lifting hardware online
  • Visit our Product FAQs to learn more about Lifting Hardware
  • Visit our Knowledge Vault to learn more about safe lifting practices
G.L. Huyett has acquired AZ Lifting Hardware
Lifting Eye Nuts

Search within Lifting Eye Nuts

Filter By
  • Aztec Lifting Hardware
  • 1045 Carbon Steel
  • 304 Stainless Steel
  • Black Epoxy
  • Hot Dipped Galvanized
  • Polished
  • Self Colored
  • Zinc Clear Trivalent
  • None
  • 1"
  • 1-1/2"
  • 1-1/4"
  • 1-1/8"
  • 1-3/8"
  • 1/2"
  • 1/4"
  • 2"
  • 3/4"
  • 3/8"
  • 5/16"
  • 5/8"
  • 7/16"
  • 7/8"
  • Blank
  • M24
  • Regular Duty
  • 1"
  • 1-1/2"
  • 1-1/4"
  • 1-1/8"
  • 1-3/8"
  • 1/2"
  • 1/4"
  • 2"
  • 3/4"
  • 3/8"
  • 5/16"
  • 5/8"
  • 7/16"
  • 7/8"
  • Blank
  • 10
  • 11
  • 13
  • 14
  • 16
  • 18
  • 20
  • 4.5
  • 6
  • 7
  • 8
  • 9
  • .750" (3/4)
  • 1.000" (1)
  • 1.250" (1-1/4)
  • 1.500" (1-1/2)
  • 1.750" (1-3/4)
  • 2.000" (2)
  • 2.250" (2-1/4)
  • 2.500" (2-1/2)
  • 3.125" (3-1/8)
  • 4.125" (4-1/8)