Hook End Turnbuckles

Hook end fittings feature a hook at the end of a threaded rod or shank and can quickly and easily connect to and disconnect from other rigging components, such as eye bolts or wire rope eyes. Hook fittings should not be used in applications where tension in the assembly can suddenly release, as the hook may detach from its mating component and cause injury. Verify the proper fit of the hook with its mating hardware prior to installation, as the hook tends to be larger than other rigging components with similar working load limits. Hook ends are available with either left handed or right handed threads, and an end fitting of each thread direction is needed to complete the turnbuckle assembly.

  • Ideal fitting to quickly attach and detach turnbuckle assemblies
  • Do not use if tension of the assembly can suddenly release
  • Offered in corrosion resistant hot dip galvanized 1045 carbon steel or 304 stainless steel
  • GL Huyett turnbuckles are not intended for lifting
  • Turnbuckles are designed for straight pull, in-line applications
  • Visit our Product FAQs to learn more about Lifting Hardware
Aztec Lifting, Rigging, and Suspension Hardware Now Available from G.L. Huyett
Hook End Turnbuckles

Search within Hook End Turnbuckles

Filter By
  • Aztec Lifting Hardware
  • 1045 Carbon Steel
  • 304 Stainless Steel
  • Hot Dipped Galvanized
  • Polished
  • Hook End
  • 1 For 12 TB
  • 1 For 24 TB
  • 1/2 For 12 TB
  • 1/2 For 6 TB
  • 1/2 For 9 TB
  • 1/4 For 4 TB
  • 3/4 For 12 TB
  • 3/4 For 18 TB
  • 3/4 For 6 TB
  • 3/4 For 9 TB
  • 3/8 For 6 TB
  • 5/16 For 4-1/2 TB
  • 5/8 For 12 TB
  • 5/8 For 6 TB
  • 5/8 For 9 TB
  • 7/8 For 12 TB
  • 1"
  • 1/2"
  • 1/4"
  • 3/4"
  • 3/8"
  • 5/16"
  • 5/8"
  • 7/8"