Wire Rope Clips

U-bolt cable clamps, or single-saddle wire rope clips, are used to connect two cable ends together or make a wire rope eye and are available in drop forged or malleable steel. They are comprised of a saddle, U-bolt and two hex nuts. Wire rope clamps are an alternative to swage sleeves and an economical way to make cable assemblies in the field. Drop forged U-bolt clamps and drop forged fist grip type clips should be used for critical applications or any type of overhead lifting and suspension. DO NOT use a malleable wire rope clip for these applications. Typical wire rope assemblies require at least two or three wire rope clamps, but more may be required depending on the diameter of the cable.

  • Economical choice for creating wire rope eyes in the field
  • Use with wire rope thimbles to prevent damage to cable eyes
  • Available in 304 stainless steel or zinc clear finish for corrosion resistance
  • Wire rope clamps can derate the cable assembly by 10% to 20%
  • Installation requires a torque wrench and must be re-torqued after a test load
  • Visit our Product FAQs to learn more about Lifting Hardware
G.L. Huyett has acquired AZ Lifting Hardware
Wire Rope Clips

Search within Wire Rope Clips

Filter By
  • Aztec Lifting Hardware
  • 1045 Carbon Steel
  • 304 Stainless Steel
  • Saddle-Cast Iron/Bolt-Carbon
  • Polished
  • Saddle-HDG/Bolt-Electro Galv
  • Zinc Clear Trivalent
  • Forged
  • Malleable
  • None
  • 2-1/4"
  • 1"
  • 1-1/2"
  • 1-1/4"
  • 1-1/8"
  • 1-3/4"
  • 1-3/8"
  • 1-5/8"
  • 1/16"
  • 1/2"
  • 1/4"
  • 1/8"
  • 2"
  • 3/16"
  • 3/4"
  • 3/8"
  • 5/16"
  • 5/8"
  • 7/16"
  • 7/8"
  • 9/16"
  • .687" (11/16)
  • .937" (15/16)
  • 1.000" (1)
  • 1.375" (1-3/8)
  • 1.500" (1-1/2)
  • 1.875" (1-7/8)
  • 2.250" (2-1/4)
  • 2.375" (2-3/8)
  • 2.750" (2-3/4)
  • 3.125" (3-1/8)
  • 3.500" (3-1/2)
  • 3.875" (3-7/8)
  • 4.438" (4-7/16)
  • 4.938" (4-15/16)
  • 5.750" (5-3/4)
  • 6.438" (6-7/16)
  • 7.125" (7-1/8)
  • 1/2"
  • 1/4"
  • 3/16"
  • 3/4"
  • 3/8"
  • 5/8"
  • 7/16"
  • 9/16"